About Portfolio Blog Podcast Contact Book A Call

From Garage to Pro Studio- Full Band Recording In One Room

 

Book Your Free Call: https://www.soundproofyourstudio.com/Step1
FREE Soundproofing Workshop: https://www.soundproofyourstudio.com/workshop 

 

Have you ever dreamed of turning your garage into a professional recording studio where your whole band can play together without disturbing the neighbors? It’s totally possible, but it takes careful planning, the right materials, and a solid design approach. In this article, we’ll walk you through the process of building a one-room home recording studio inside a garage, from the walls and floors to the acoustic treatment and HVAC.

Whether you’re planning a DIY build or working with a designer, these steps will help you avoid costly mistakes and create a space where creativity thrives.

Step 1: Designing the Layout

The first step is envisioning how your space will function. A garage may look simple, but once it becomes a studio, every inch counts. A typical layout might include:

  • A mixing desk and sidecar for your gear

  • A couch for comfort during long sessions

  • Space for instruments like drums, piano, and guitars

  • Acoustic treatment strategically placed around the room

This gives you a creative hub where tracking, mixing, and rehearsing can all happen in the same space.

Step 2: Building the Double Wall System

Sound isolation starts with decoupling. That means building a double wall system with two sets of 2x4 studs and a one-inch air gap in between. This “room within a room” design keeps sound from escaping into the neighborhood. Pair that with a solid ISO Store door, and you’re off to a strong start.

Step 3: Creating a Strong, Independent Ceiling

Instead of modifying existing garage trusses (which can lead to structural problems), build an independent ceiling frame. This not only improves soundproofing but also keeps your structure safe. Make sure every seam is sealed tight to prevent sound leaks.

Step 4: Insulation and Airtightness

Think of air gaps as sound leaks waiting to happen. To stop that:

  • Add spray foam insulation above the studio ceiling

  • Insulate the new ceilings built off the interior walls

  • Focus on airtight construction so sound stays in

Step 5: Fire Stops for Safety

Soundproofing isn’t just about audio — safety matters, too. Install vertical fire stops every 10 feet using 5/8-inch drywall. These prevent fire from spreading horizontally while still keeping the walls decoupled.

Step 6: Flooring That Works

For flooring, combine acoustic underlayment with engineered hardwood. This creates a durable surface that when combined with the existing concrete slab reduces noise transfer without sacrificing style.

Step 7: Acoustic Treatment

Once the room is sealed, it’s time to make it sound good inside. Some essentials include:

  • GIK acoustics panels on the back wall

  • Bass traps in corners

  • Acoustic clouds on the ceiling

  • Thoughtful placement of instruments (e.g., drums at the back, piano at the side, couch in the middle)

This ensures your recordings sound as professional inside as they do isolated outside.

Step 8: Beefing Up the Walls

Your walls are your biggest sound barrier. For maximum effectiveness, use two layers of 5/8-inch drywall plus plywood. The added mass greatly improves isolation and helps control low-end energy.

Step 9: Doors That Actually Block Sound

Ordinary hollow-core doors won’t cut it. Instead, install ISO Store doors with heavy-duty rubber seals at the base. Use adhesive and screws to lock them in place, creating an airtight barrier.

Step 10: Electrical & Wiring

Studios have unique electrical needs. A star grounding system prevents buzzing and interference, while a simple wiring plan (with dedicated outlets and low-voltage cable runs) keeps everything clean and reliable.

Step 11: Ventilation & HVAC

A sealed studio needs fresh air, but standard HVAC systems can ruin your soundproofing. Instead:

  • Install a Broan AI ERV system for ventilation (130 -150 CFM works well)

  • Add a dehumidifier to maintain comfort

  • Build baffle boxes for air ducts to stop sound from leaking through vents

Step 12: Acoustic Schedule & Final Touches

Every treatment piece should be planned and labeled — from diffusers to ceiling clouds. This keeps installation organized and ensures your room sounds balanced.

Finally, 3D renderings and a materials list can help you (or your contractor) visualize the design and avoid surprises during construction.

Final Thoughts

Transforming a garage into a professional, soundproof recording studio is no small project, but with the right design and materials, it can be done — and the results are incredible. Imagine being able to record your full band in one room without worrying about noise complaints or bad acoustics.

If you’re dreaming about a project like this, you don’t have to navigate it alone. I’ve guided countless musicians and creators in building studios that bring their vision to life.

And if it all feels a little overwhelming, you’re not alone. That’s exactly why we offer two simple ways to get extra support:

📅 Book Your Free Call: https://www.soundproofyourstudio.com/Step1
🎓 Join Our Free Workshop: https://www.soundproofyourstudio.com/workshop

With the right plan in place, your garage can go from an echoey concrete box to a professional-grade studio you’ll love creating in.